Siemens siprotec 7SA6 User Manual page 517

Distance protection

Hide thumbs Also See for siprotec 7SA6:

Table of Contents

From PC with

C53000-G1176-C133-1

Confirm the change with the

To change the time offset or the tolerance time for a clock error signal, select &ORFN

6HWXS under 6(783(;75$6, as shown in Figure 7-30. Under 2IIVHW, the time off-

set can be changed. Under (UURU 7LPH, the time delay for the alarm and the source

of the time synchronization can be changed. These adjustments are done in the same

manner as setting the time, by overwriting the displayed values and confirming with

To return to the S(783(;75$6 level, press the

return to the 0$,1 0(18, press the

!&ORFN 6HWXS

Date and time settings from the front panel

To manually change the date and time of the device:

Click on Device in the menu bar as shown in Figure 7-31. Select the command Set

Selecting the command Set Clock in DIGSI

A dialog field, Set clock & date in device, is opened. The displayed values are the

present date and time. The day of the week is automatically derived from the date —

and cannot be edited.

• Edit the input fields 'DWH and 7LPH. The format depends on your regional settings

of the PC. See Figure 7-32.

Date: mm/dd/yyyy or dd.mm.yyyy

Time: hh.mm.ss

Control During Operation

key, several times if necessary. To

Show Quick Links

Table of Contents