Siemens siprotec 7SA6 User Manual page 112

®
SIPROTEC 4 Devices
CFC
Viewing the Config-
uration on the
Operating Panel
4-24
®
SIPROTEC 4 device information can be connected in a user-specified manner using
the programmable logic components of the DIGSI
implement interlocking checks, create grouped messages, or derive limit value viola-
tion messages.
Information can be both a source and a destination in combined CFC editing. The spe-
cific logic's inputs, e.g. the individual messages that are to be combined to form a
grouped message, must be marked in the Destination C column. The logic's output,
the grouped message in this example, is derived from the Source C column.
The configuration can be seen on the operating panel of the SIPROTEC
• In the main menu, select 6HWWLQJV → 0DVNLQJ ,2 .
0$6.,1* ,2

!%LQDU\ ,QSXWV
!/('
• In the next menu, select 0DVNLQJ ,2 → e.g. %LQDU\ ,QSXWV.
%,1$5< ,13876

!%LQDU\ ,QSXW  ²!
!%LQDU\ ,QSXW  ²!
Figure 4-18 Reading the configuration using the operator control panel, example assignment
of binary input 2
®

²! 
²! 

²
²
4 CFC. For example, the user can
®
C53000-G1176-C133-1
4 device.
.
.
7SA6 Manual