Tagging - Siemens siprotec 7SA6 User Manual

Control During Operation
7.4.5

Tagging

:
From PC with
®
DIGSI 4
0$,1 0(18

$QQXQFLDWLRQ
0HDVXUHPHQW
&RQWURO
Figure 7-54 Tagging Equipment from the HMI
7-54
To identify unusual operating conditions in the power system, tagging can be done.
The tagging can, for example, be entered as additional operating conditions in
interlocking checks, which are set up with CFC. Tagging is configured in the same way
as for operating devices.
With a device ready for operation, first press the
key, select the menu item &RQWURO and move to editing the control
Using the
key. The selection &21752/ appears.
functions with the
Select the item 7DJJLQJ with the
key. The selection 7$**,1* appears. See Figure 7-54. The status of the tagging
is displayed 7DJJLQJ → 'LVSOD\, or changed using 7DJJLQJ → 6HW.

²! 
²! 
²! 
&21752/

%UHDNHU6ZLWFK
7DJJLQJ
,QWHUORFN
Note:
The Manual Overwrite function is always done using the HMI on the SIPROTEC
devices.
key. The 0$,1 0(18 appears.
MENU
key and switch to the next selection using the

²! 
²!  7$**,1*

²! 
'LVSOD\
6HW

²! 
²! 
®
4
7SA6 Manual
C53000-G1176-C133-1