Siemens siprotec 7SA6 User Manual page 531

7SA6 Manual
C53000-G1176-C133-1
Select, by means of the
item by pressing the
7-45.
Select 'LVSOD\ (default) and press the
which the positions of all planned switching devices can be read out.
%5($.(56:,7&+ 

!'LVSOD\
!&RQWURO
Figure 7-45 Display of Switch Positions in the HMI (example)
key can be used to return to %5($.(56:,7&+.
The
To control a switching device, select the option &RQWURO in the %5($.(56:,7&+
sub-menu and press the
controlled. See Figure 7-46. All planned switching devices appear. The actual position
of each switch is displayed first. Use the
switch.
%5($.(56:,7&+ 

!'LVSOD\
!&RQWURO
Figure 7-46 Control of Switching Devices from the Operator Control Panel (example)
Select the switch to be controlled using the
Enter Password No. 1 (for interlocked switching) and acknowledge with the
Note: if the switching mode is 121²,17(5/2&.(' 7HVW (Sub-section 7.4.7), all
switching operations are only possible with Password No. 2 (for non-interlocked
switching).
A new window appears. Depending on the operating and command type of the
selected switching device, various options are offered. Move between them using
the and keys.
&2175
 !23(1
36 ! &/26(
7UH (VFDSH
Figure 7-47 Selection Window for Control Operations on the Front Panel (example)
key, the item %UHDNHU6ZLWFK, and continue with the
key. The selection %5($.(56:,7&+ appears. See Figure
key. The selection ',63/$< appears, in
²! 
²! 
key to go to the table of operating resources that can be
and
²! 
²! 
and


21
21
Control During Operation
',63/$< 

!%UHDNHU 23(1
!'LVF6ZLW &/26
keys to move to the desired
&21752/ 

%UHDNHU !&/26
'LVF6ZLW &/26
*QG6ZLW 2))
keys and press the key.
ENTER
key.
ENTER
7-47