®
SIPROTEC
4 Devices
4.3.1
Annunciations
®
Display in DIGSI
4
4-10
The scope of the indication (messages) that are given under Annunciation is deter-
mined when settings for the configuration of functions are applied to the SIPROTEC
device.
The messages are divided into the following categories, and displayed using DIGSI
or the operator control panel of the device:
q
Event Log: Operating messages: independent of network faults, e.g. messages
about switching operations or monitoring functions;
q
Trip Log: Fault messages;
q
General interrogation: display of present condition messages;
q
Spontaneous messages; continuous display of important messages from the de-
vice; e.g., after faults, switching operations, etc.
®
DIGSI
, annunciations
Figure 4-3
4
To view the indications in DIGSI
• Select $QQXQFLDWLRQ in the navigation (left) window.
All annunciation groups are shown in the data (right) window.
• Double click on an annunciation group in the data window, such as (YHQW /RJ.
The data and time appear. Double click on the entry. The list of indications appears.
– example
®
4 2QOLQH:
®
®
4
7SA6 Manual
C53000-G1176-C133-1