Appendix C Trap Entries - D-Link xStack DGS-3620 Reference Manual

Hide thumbs Also See for xStack DGS-3620:
Table of Contents

Advertisement

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Appendix C
This table lists the trap logs found on the Switch.
Category
Trap Name
MAC Notification
swL2macNotification
MAC-based Access
swMacBasedAccessControlLogge
Control
dSuccess
swMacBasedAccessControlLogge
dFail
swMacBasedAccessControlAges
Out
PIM6
pimNeighborLoss
pimInvalidRegister
pimInvalidJoinPrune
Trap Entries
Description
This trap indicates the MAC addresses
variation in address table
Binding objects:
(1)swL2macNotifyInfo
The trap is sent when a MAC-based
Access Control host is successfully logged
in.
Binding objects:
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
The trap is sent when a MAC-based
Access Control host login fails.
Binding objects:
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
The trap is sent when a MAC-based
Access Control host ages out.
Binding objects:
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
A pimNeighborLoss notification signifies
the loss of an adjacency with a neighbor.
This notification should be generated
when the neighbor timer expires, and the
router has no other neighbor on the same
interface with the same IP version and a
lower IP address than itself.
This notification is generated whenever
the counter pimNeighborLossCount is
incremented, subject to the rate limit
specified by
pimNieghborLossNotificationsPeriod.
Binding objects:
(1) pimNeighborUpTime
A pimInvalidRegister notification signifies
that an invalid PIM Register message was
received by this device.
This notification is generated whenever
the counter pimInvalidRegisterMsgsRcvd
is incremented, subject to the rate limit
specified by
pimInvalidRegisterNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimInvalidRegisterAddressType
(3) pimInvalidRegisterOrigin
(4) pimInvalidRegisterGroup
(5) pimInvalidRegisterRp
A pimInvalidJoinPrune notification signifies
that an invalid PIM Join/Prune message
was received by this device.
This notification is generated whenever
the counter pimInvalidJoinPruneMsgsRcvd
is incremented, subject to the rate limit
specified by
pimInvalidJoinPruneNotificationPeriod.
Binding objects:
1316
OID
1.3.6.1.4.1.171.11.118.
X.2.100.1.2.0.1
(X:module ID)
1.3.6.1.4.1.171.12.35.1
1.1.0.1
1.3.6.1.4.1.171.12.35.1
1.1.0.2
1.3.6.1.4.1.171.12.35.1
1.1.0.3
1.3.6.1.2.1.157.0.1
1.3.6.1.2.1.157.0.2
1.3.6.1.2.1.157.0.3

Advertisement

Table of Contents
loading

Table of Contents