Cut position when using the label in
cutter mode.
The regular cut position is between labels (only cut
on the liner).
Do not cut on the label as the remaining adhesive
on the blade will decrease the performance of the
cutter.
Cut position when using the media with
perforated line in cutter mode.
Do not cut on the perforated line or area from the
perforated line towards you. Doing so may cause a
paper jam or damage.
• Media roll
Do not cut on the perforated line or within 1 mm
(0.04") from the perforated line towards you.
• Fan-fold media
Do not cut on the perforated line or within 4 mm
25 mm (0.16"
0.98") from the perforated line
to
to
towards you.
5 Cleaning and Performing Printer Adjustments
Media Feed Direction
Cut Position
(I-mark Sensor)
Cut Position
Area not to be cut
1 mm
25 mm
Area not to be cut
4 mm
CL4NX/CL6NX Operator Manual
Cut Position
(Gap Sensor)
Label
Liner
Label
Perforated
line
Perforated
line
267