SATO CL4NX Operator's Manual page 158

4 Operation and Configuration
Flow Control
Interface > RS-232C > Flow Control
Set the communication protocol.
Available to change only if you have selected RS-232C in the Interface
menu.
The options are as follows:
• READY/BUSY Multi
• XON/XOFF Multi
• STATUS3
• STATUS4
• STATUS5
• None
BCC
Interface > RS-232C > BCC
Enable or disable the BCC check function.
Shows only if you have selected RS-232C in the Interface menu and if you
have selected STATUS5 in the Flow Control menu.
The options are as follows:
• Enabled: Enable the BCC check function.
• Disabled: Disable the BCC check function.
USB
Interface > USB
Set the USB connection.
The setting items are as follows:
1 Flow Control
2 BCC
156
CL4NX/CL6NX Operator Manual
Set the communication protocol.
Set the BCC check function.
*Shows only if you have selected Status5 in
the Flow Control menu.