Ribbon And Media - SATO CL4NX Operator's Manual

7 Appendix
7.7.2

Ribbon and Media

Model
Ribbon (Use genuine ribbon made by SATO.)
Size
Wind Direction
Winding Method
Media (Use genuine media made by SATO.)
Type
Size
Continuous
Pitch
(With Liner)
Width
(With Liner)
Tear-off/Cutter
Pitch
(With Liner)
Width
(With Liner)
* Above pitch and width are valid for die-cut labels. For media without liner like tags, refer to the value 'with
liner'.
354
CL4NX/CL6NX Operator Manual
CL4NX
Length: maximum 600 m (1968.5 ft.)
Width: 39.5 mm to 128 mm (1.55" to 5.04")
*When the width is 39.5 mm (1.55"), the
maximum length is 450 m (1476.4 ft.).
* The maximum length varies depending
on the ribbon type.
* Use the ribbon that is wider than the media.
Face-out/Face-in
Coreless
Media roll (Face-in wound/face-out wound), Fan-fold media
203 dpi: 6 to 2497 mm (0.24" to 98.30")
305 dpi: 6 to 1497 mm (0.24" to 58.94")
609 dpi: 6 to 397 mm (0.24" to 15.63")
203 dpi: 9 to 2500 mm (0.35" to 98.42")
305 dpi: 9 to 1500 mm (0.35" to 59.05")
609 dpi: 9 to 400 mm (0.35" to 15.75")
22 to 128 mm (0.87" to 5.04")
25 to 131 mm (0.98" to 5.16")
203 dpi: 17 to 2497 mm (0.67" to 98.30")
305 dpi: 17 to 1497 mm (0.67" to 58.94")
609 dpi: 17 to 397 mm (0.67" to 15.63")
203 dpi: 20 to 2500 mm (0.79" to 98.42")
305 dpi: 20 to 1500 mm (0.79" to 59.05")
609 dpi: 20 to 400 mm (0.79" to 15.75")
* When Print Mode is set to Cut & Print,
the minimum pitch for each print speed
is the following value:
2 ips: 40 mm (1.57"), 3 ips: 58 mm (2.28"),
4 ips: 75 mm (2.95"), 5 ips: 93 mm (3.66"),
6 ips: 110 mm (4.33"), 7 ips: 125 mm (4.92"),
8 ips: 140 mm (5.51"), 9 ips: 156 mm (6.14"),
10 ips: 171 mm (6.73")
22 to 128 mm (0.87" to 5.04")
25 to 131 mm (0.98" to 5.16")
CL6NX
Length: maximum 600 m (1968.5 ft.)
Width: 59 mm to 177 mm (2.32" to 6.98")
* The maximum length varies depending
on the ribbon type.
* Use the ribbon that is wider than the
media.
203 dpi: 16 to 2497 mm (0.63" to 98.30")
305 dpi: 16 to 1497 mm (0.63" to 58.94")
203 dpi: 19 to 2500 mm (0.75" to 98.42")
305 dpi: 19 to 1500 mm (0.75" to 59.05")
47 to 177 mm (1.85" to 6.96")
50 to 180 mm (1.97" to 7.01")
203 dpi: 17 to 2497 mm (0.67" to 98.30")
305 dpi: 17 to 1497 mm (0.67" to 58.94")
203 dpi: 20 to 2500 mm (0.79" to 98.42")
305 dpi: 20 to 1500 mm (0.79" to 59.05")
* When Print Mode is set to Cut & Print,
the minimum pitch for each print speed
is the following value:
2 ips: 40 mm (1.57"), 3 ips: 58 mm (2.28"),
4 ips: 75 mm (2.95"), 5 ips: 93 mm (3.66"),
6 ips: 110 mm (4.33"), 7 ips: 125 mm (4.92"),
8 ips: 140 mm (5.51"), 9 ips: 156 mm (6.14"),
10 ips: 171 mm (6.73")
47 to 177 mm (1.85" to 6.96")
50 to 180 mm (1.97" to 7.01")