SATO CL4NX Operator's Manual page 128

4 Operation and Configuration
Key Index
Interface > Network > Settings > Wi-Fi > WEP Conf. > Key Index
Set the key index.
Set the key index (WEP key) according to the access point of the wireless
LAN you connect.
The setting range is from 1 to 4.
CAUTION
Depending on the product, the range of the key index may be 0 to 3. In
such a case, if you have set the printer to 1, then set the product to 0.
Key #1 - Key #4
Interface > Network > Settings > Wi-Fi > WEP Conf. > Key #1 - Key #4
Set the WEP key #1 - key #4.
You can enter alphabet (upper case and lower case) and numbers.
Depending on the length of the WEP key, the number of characters you
can set is as follows:
• When the key length is 64 bit
ASCII: Five characters
Hexadecimal: Ten characters
• When the key length is 128 bit
ASCII: Thirteen characters
Hexadecimal: Twenty-six characters
WPA Conf.
Interface > Network > Settings > Wi-Fi > WPA Conf.
authentication
Set the WPA
Shows only if you have selected
menu.
The setting items are as follows:
1 WPA
Authentication
2 PSK
3 EAP Conf.
126
CL4NX/CL6NX Operator Manual
.
WPA+WPA2 or WPA2
Set the WPA authentication method.
Set the PSK shared key.
*Shows only if you have selected Personal
(PSK) in the WPA Authentication menu.
Set the functions for EAP.
*Shows only if you have selected items other
than Personal (PSK) in the WPA
Authentication menu.
in the Security