SATO CL4NX Operator's Manual page 132

4 Operation and Configuration
Anon. Outer ID
Interface > Network > Settings > Wi-Fi > EAP Conf. > Anon. Outer ID
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. >
Anon. Outer ID
Set the external ID.
Shows only if you have selected FAST, PEAP or TTLS in the EAP Mode
menu.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 63 characters.
Verify Server Cert.
Interface > Network > Settings > Wi-Fi > EAP Conf. > Verify Server Cert.
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. >
Verify Server Cert.
Enable or disable server certificate validation.
Shows only if you have selected anything other than LEAP in the EAP
Mode menu.
The options are as follows:
• Enabled: Enable server certificate validation.
• Disabled: Disable server certificate validation.
Private Key P/W
Interface > Network > Settings > Wi-Fi > EAP Conf. > Private Key P/W
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. >
Private Key P/W
Set the Private Key password.
Shows only if you have selected TLS in either the EAP Mode menu or
Inner Method menu.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 64 characters.
130
CL4NX/CL6NX Operator Manual