SATO CL4NX Operator's Manual page 381

Timing Chart (Wait signal for dispense completion)
Item
Print
Print End TYPE 1
(Print Done)
TYPE 2
TYPE 3
TYPE 4
Wait for
dispense completion
Print
TYPE 1
Print End
(Print Done)
TYPE 2
TYPE 3
TYPE 4
Wait for
dispense completion
1. When the wait signal for dispense completion is enabled, note that the output timing of the print end
signal (print done) differs between Backfeed After Print and Backfeed Before Print.
1) In Backfeed After Print, the print end signal (print done) is output after the label waiting for
dispense is removed and the printer backfeeds to the print start position.
2) In Backfeed Before Print, the print end signal (print done) is output after the printer feeds the
label to the dispense position.
2. "Printed 1 piece" includes the operation of the printer feeding the label to the dispense position after
printing.
Output Waveform
Printed 1 piece
Printed 1 piece
7 Appendix
Dispense Complete
Sum of 500ms
and backfeed
time
Dispense Complete
CL4NX/CL6NX Operator Manual
379