SATO CL4NX Operator's Manual page 172

4 Operation and Configuration
Retries
Interface > RFID > Retries
Set the number of failed encoding attempts before error warning/print
pause.
The setting range is from 0 to 9.
If you set to 0, the RFID error screen shows and printing continues.
Mark bad tags
Interface > RFID > Mark bad tags
Set the error print for the RFID tag error.
• Enabled: Enable the RFID error print function.
• Disabled: Disable the RFID error print function.
For details on the RFID error print, refer to
Tag Errors.
170
CL4NX/CL6NX Operator Manual
Section 7.5.1 Printing RFID
U H
HF F
U H
HF F