SATO CL4NX Operator's Manual page 337

Item
Printable Area Cut & Print mode:
(Barcode Readable Do not print a 2D code or serial barcode (90° or 180° orientation in relation to the
Area) media feed direction) within the following area as it may cause a white void.
• CL4NX: 18 to 23 mm (0.70" to 0.90") from the front end of the label (cut position)
• CL6NX: 19 to 25 mm (0.75" to 0.98") from the front end of the label (cut position)
Linerless mode (CL4NX only):
Barcodes printed within a range of 25 mm (0.98") from the trailing end of the label
cannot be read as it is blocked by the cutter cover.
Cutter cover
Cut position
Print head
Cutter cover
Cut position
Print head
Cutter cover
Cut position
Print head
Specification
18 mm (0.70")
Range in which
white voids occur
19 mm (0.75")
Range in which
white voids occur
Readable area (for the
minimum media pitch)
(13 mm (0.51"))
Unreadable area
25 mm (0.98")
CL4NX/CL6NX Operator Manual
7 Appendix
23 mm (0.90")
25 mm (0.98")
Minimum
media pitch
38 mm (1.50")
335