SATO CL4NX Operator's Manual page 152

4 Operation and Configuration
User
Interface > Network > Services > SNMP > Traps > User
Set the Traps user name.
Shows only if you have selected 3 in the SNMP Version menu.
You can enter alphabetic, numeric and symbolic characters in the range of
1 to 32 characters.
Initial setting: trapuser
Engine ID
Interface > Network > Services > SNMP > Traps > Engine ID
Set the engine ID.
Shows only if you have selected 3 in the SNMP Version menu.
Initial setting: Created from the MAC address.
Hexadecimal characters are allowed and the range is from 10 to 64
characters (only an even number of characters are allowed).
Security
Interface > Network > Services > SNMP > Traps > Security
Set the security level.
Shows only if you have selected 3 in the SNMP Version menu.
The options are as follows:
• None
• Authentication
• Privacy
Authentication Protocol
Interface > Network > Services > SNMP > Traps > Authentication Protocol
Set the authentication protocol.
Shows only if you have selected Authentication or Privacy in the
Security menu.
The options are as follows:
• MD5
• SHA
150
CL4NX/CL6NX Operator Manual