SATO CL4NX Operator's Manual page 231

Delete
Tools > Profiles > Delete
Delete the profile of the printer.
The procedure to delete the profile is as follows:
1. Select the profile to be deleted using the
2. Press the button or press the right soft button to confirm.
The profile name is deleted from the list.
Load
Tools > Profiles > Load
Load the profile of the printer.
The procedure to load the profile is as follows:
1. Select the profile to be loaded using the
2. Press the button or press the right soft button to confirm.
A checkmark shows on the right side of the loaded profile name. And
the name of the loaded profile is shown on the Profiles menu in
parenthesis.
Save
Tools > Profiles > Save
Save the current printer configurations as a new profile.
The screen shows a list of the profiles saved in the printer. If no profile is
saved, the screen shows an empty list.
To save existing printer configurations as a new profile, press the left soft
button and enter the name of the profile.
You can enter a maximum of thirty-two characters including alphabet
(upper case and lower case), numbers and symbols.
Press the right soft button to confirm.
The new profile name is shown on the list and is loaded.
/
buttons.
/
buttons.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
229