SATO CL4NX Operator's Manual page 162

4 Operation and Configuration
CRC Mode
Interface > Bluetooth > CRC Mode
Enable or disable the CRC check function.
The options are as follows:
• Enabled: Enable the CRC check function.
• Disabled: Disable the CRC check function.
Flow Control
Interface > Bluetooth > Flow Control
Set the communication protocol.
The options are as follows:
• Status3
• Status4 Multi
• None
NFC
Interface > NFC
Set the NFC connection.
The setting item is as follows:
1 I/F Enable
Note
This feature is supported on printers from serial number 6B~ and above.
I/F Enable
Interface > NFC > I/F Enable
Enable or disable the NFC interface.
The options are as follows:
• Enabled: Enable the NFC interface.
• Disabled: Disable the NFC interface.
160
CL4NX/CL6NX Operator Manual
Enable or disable the NFC interface.