SATO CL4NX Operator's Manual page 93

Darkness
Printing > Darkness
Specify the print darkness from ten steps.
The setting range is from 1 to 10. 1 is the lightest and 10 is the darkest.
To further fine tune the print darkness, set the items in Printing >
Advanced > Adjustments > Darkness Adjust.
Imaging
Printing > Imaging
Set the print reference position in the vertical and horizontal directions.
The setting items are as follows:
1 Vertical
2 Horizontal
+H
Base reference
Offset of horizontal
point after offset base reference point
Adjust the print position in the vertical (feed)
direction.
Adjust the print position in the horizontal
direction.
Label
Liner
Gap
Offset of vertical
+V
base reference point
Print reference position
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
91