SATO CL4NX Operator's Manual page 173

MCS
Interface > RFID > MCS
Set the Multi vendor Chip-based Serialization. Shows only if the module is
UHF. The setting items are as follows:
1 MCS
2 Chip
Manufacturer
3 Pre-Encoded Tag
4 Assign Prefix
5 MCS Prefix Digit
6 Input Prefix
MCS
Interface > RFID > MCS > MCS
Enable or disable the Multi vendor Chip-based Serialization.
The options are as follows:
• Enabled: Enable the Multi vendor Chip-based Serialization.
• Disabled: Disable the Multi vendor Chip-based Serialization.
Note
Multi vendor Chip-based Serialization: use TID as base for SGTIN serial
number.
Enable or disable the Multi vendor Chip-based
Serialization.
Manually set MCS manufacturer prefix.
*Shows only if you have selected Enabled in
the MCS menu.
Enable or disable for tags with pre-encoded
EPC serial numbers.
*Shows only if you have selected Enabled in
the MCS menu.
Set how to assign the three digit prefix data.
*Shows only if you have selected Enabled in
the MCS menu.
Set the length of manually assigned MCS
manufacturer prefix.
*Shows only if you have selected Manual in the
Assign Prefix menu.
Set the contents of MCS prefix.
*Shows only if you have selected Manual in the
Assign Prefix menu and if you have selected
anything other than None in the MCS Prefix
Digit menu.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
U
HF
U
HF
171