Interface Menu - SATO CL4NX Operator's Manual

4.4.3

Interface Menu

In the Interface menu, the setting items are as follows:
Interface
1 Network
2 IEEE1284
3 RS-232C
4 USB
5 Bluetooth
6 NFC
7 Ignore CR/LF
8 Ignore CAN/DLE
9 External I/O
10 RFID
(CL4NX only)
Network
Interface > Network
To use LAN and wireless LAN for the interface between the host and the
printer.
The setting items are as follows:
1 Settings
2 Services
3 Advanced
Set the LAN connection and wireless LAN
connection.
Set the IEEE1284 connection.
*Shows only if the combo interface board is
installed.
Set the RS-232C connection.
*Shows only if the combo interface board is
installed.
Set the USB connection.
Set the Bluetooth connection.
Set the NFC connection.
*This feature is supported on printers from
serial number 6B~ and above.
Set to ignore CR/LF codes.
Set to ignore CAN/DLE codes.
Set the external signal (EXT).
*Shows only if the combo interface board is
installed.
Set the RFID.
*Shows only for RFID models.
Set the LAN, wireless LAN or select the
interface.
Set the TCP/IP port number, NTP, LPD, FTP or
SNMP.
Set the advanced function for the interface.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
105