SATO CL4NX Operator's Manual page 325

7
Press the / buttons to select the item
you want to set. Then press the
to go to the adjustment screen.
Refer to Interface > RFID (CL4NX only)
Section 4.3 Settings Menu Tree Structure
details on the configuration items.
8
Open the top cover q.
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
9
Push the head lock lever w towards the
rear to unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
button
menu of
for
7 Appendix
1
CL4NX/CL6NX Operator Manual
2
323