SATO CL4NX Operator's Manual page 181

Show Error
Applications > SBPL > Show Error
Enable or disable the command error indication when incorrect command
or parameter is detected in the print data.
The options are as follows:
• Enabled: Enable the command error indication. The command error is
shown and the print operation is paused when incorrect command or
parameter is detected in the print data.
• Disabled: Disable the command error indication.
Standard Code
Applications > SBPL > Standard Code
Set the protocol code.
The options are as follows:
• Enabled: Use a standard code.
• Disabled: Use a non-standard code.
Note
• The message prompting to restart the printer will appear on the online/
offline screen if you have made any changes. In such a case, reboot
the printer to make the setting effective.
• When AUTO is selected in the Protocol menu while Disabled is
selected, the setting will be changed to Enabled.
Orientation
Applications > SBPL > Orientation
Select the layout for printing the label.
• Portrait: Use a portrait layout. (No rotation)
• Landscape: Use a landscape layout. (90-degree rotation)
• Inv. Portrait: Use an inverse portrait layout. (180-degree rotation)
• Inv. Landscape: Use an inverse landscape layout. (270-degree
rotation)
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
179