5 Cleaning and Performing Printer Adjustments
5.3 Adjusting the Base Reference Point
5.3.1
About the Base Reference Point
The base reference point is the point at which one determines the print position and stop/cut/dispensing
position.
The base reference point differs depending on the operation mode or media sensor you use.
262
CL4NX/CL6NX Operator Manual
Continuous Mode/ Tear-off Mode
I-mark Label
Print and
stop position
I-mark Label
Print and cut
position
Dispenser Mode
I-mark Label
Print and
dispensing
position
Cutter Mode
Gap Label
Print and
stop position
Gap Label
Cut
position
Print
position
Gap Label
Dispensing
position
Print
position