Pressure Balance Setting - SATO CL4NX Operator's Manual

5.6.2

Pressure Balance Setting

The adjustment procedure for the pressure balance is as follows:
1
Open the top cover of the printer.
2
Find the adjustment dials q on the top of the print head assembly as shown.
3
Turn the adjustment dials q according to the media width and set the pressure
balance.
For CL4NX:
Media Width (mm)
Adjustment Dials
*First use the dial setting for the head pressure and then adjust according to the media width.
Above table shows an example when the head pressure is Left
For CL6NX:
Media Width (mm)
Adjustment Dials
*First use the dial setting for the head pressure and then adjust according to the media width.
Note
The factory default setting is Left
For CL6NX dispenser model, the factory default setting is Left
25 - 54

Left

Right
50 - 120 120 - 140

Left Left

Right
Right
 
and Right .
5 Cleaning and Performing Printer Adjustments
54 - 83

Left

Right

.
140 - 160
   
or Left or
 
Right
 
and Right .
CL4NX/CL6NX Operator Manual
83 - 131

Left

Right
160 - 180
 
Left or
 
Right or
273