SATO CL4NX Operator's Manual page 94

4 Operation and Configuration
Vertical
Printing > Imaging > Vertical
Set the print position in the vertical direction.
Set the offset value '+' from the print reference position to move the print
position opposite the feed direction and value '-' to move the print position
in the feed direction.
The setting range is from -792 to +792 dots.
Horizontal
Printing > Imaging > Horizontal
Set the print position in the horizontal direction.
Set the offset value '+' from the print reference position to move to the left
side and value '-' to move to the right side of the printer (when facing the
front of the printer).
+H
The setting range is from -792 to +792 dots.
92
CL4NX/CL6NX Operator Manual
+V
-V
-H