Table of Contents
Advertisement
10. Tap [FEED].
The media is fed to the print start position.
Loading the Media Roll (Printing in Cutter Mode/Partial Cutter Mode)
•
The print head and its surroundings are hot after printing. Be careful not to touch it, to
avoid being burned. Do not replace the media immediately after printing.
•
Touching the edge of the print head with your bare hand could cause injury.
•
Be careful not to touch the cutter blade.
•
Adjust the cut position so as not to cut the label.
•
To print in cutter mode, the optional cutter kit is necessary.
•
To print in partial cutter mode, the optional partial cutter kit is necessary.
Loading the Media Roll (Printing in Cutter Mode/Partial Cutter Mode)
200
Advertisement
Table of Contents
