4 Operation and Configuration
Log Files
Tools > HEX-Dump > Log Files
The setting items are as follows:
1
Copy
2
Remove
3
Print
Copy
Tools > HEX-Dump > Log Files > Copy
Copy the log files of the printer to the USB memory.
Available only if you have installed the USB memory.
The procedure to copy the log files is as follows:
1. Select the file type to copy and press the
• buff/: The buffer data saved after you perform the Buffer Dump.
• hexdump/: The received data created through Hex Dump Mode.
2. Select the file to copy and press the
on the right side of the file name.
3. After you select the file, press the right soft button to copy the selected
file to the USB memory.
CAUTION
Be sure to perform a virus check for the USB memory before connecting it
to the printer. SATO Corporation shall not be held responsible for any
printer malfunctions caused by a virus spread via USB memory.
Note
When Hex Dump Mode is set to Enabled, it may take some time before
the files are shown.
224
CL4NX/CL6NX Operator Manual
Copy the log files of the printer to the USB
memory.
* Available only if you have installed the USB
memory.
Delete the log files of the printer.
Print a hex dump of the log files of the printer.
button.
button. A checkmark shows