SATO CL4NX Operator's Manual page 56

4 Operation and Configuration
• Barcode Scanner Status
Icon
• Print Job Status
Icon
?
• Maintenance Status
Icon
54
CL4NX/CL6NX Operator Manual
Barcode scanner is connected in AEP mode.
Waiting for media removal. Remove the media.
Ribbon is near the end. Prepare a new ribbon.
Label is near the end. Prepare new media.
Command error detected. Check the print data.
Receive buffer is nearly full. Wait until the printer starts printing the previously sent data,
and then send the next data.
Defective print head is detected. Replace the print head.
Incompatible print head is detected. Replace the print head.
Clean the print head or platen roller.
Replace the print head.
Replace the platen roller.
Replace the cutter unit.
Description
Description
Description