Interface Specifications - SATO CL4NX Operator's Manual

7.8 Interface Specifications

For data communication with the host, this printer supports the following interfaces:
You can set the various interface settings of the printer through Interface in the Settings menu.
• USB (USB type B)
• LAN Ethernet
• Bluetooth
• NFC
*This feature is supported on printers from serial number 6B~ and above.
• RS-232C (DB 9 pins, female)
• IEEE1284 (Amphenol 36 pins)
• External signal (EXT) (Amphenol 14 pins)
• Wireless LAN
CAUTION
Do not connect or disconnect the interface cables (or use a switch box) with power supplied to either the
printer or host. This may cause damage to the interface circuitry in the printer or host and is not covered by
warranty.
Note
• Wireless LAN is an optional interface.
• You cannot use the wireless LAN interface and LAN interface at a time.
• The NFC interface supports the handover function that simplifies the Bluetooth/Wi-Fi connection setup with
Android devices. For details, refer to
In addition, the NFC interface can be used for changing printer settings with an Android device while the
printer is powered off and the power cord is not connected.
Section 2.4.3 NFC Interface Connection.
CL4NX/CL6NX Operator Manual
7 Appendix
363