SATO CL4NX Operator's Manual page 212

4 Operation and Configuration
Change Cutter
System > Notifications > Change Cutter
Notify when the cutter unit needs to be replaced.
The setting items are as follows:
1 Change Cutter
2 Cutter Life
3 Cutter Count
Change Cutter
System > Notifications > Change Cutter > Change Cutter
Enable or disable the notification function about when the cutter unit needs
to be replaced.
The options are as follows:
• Enabled: Enable the notification function.
• Disabled: Disable the notification function.
Cutter Life
System > Notifications > Change Cutter > Cutter Life
Set the notification interval about when the cutter unit needs to be
replaced.
Available to change only if you have selected Enabled in the Change
Cutter menu.
The printer shows the cutter count as the setting value.
The setting range is from 10 to 1000 Kcuts.
Change Platen
System > Notifications > Change Platen
Notify when the platen roller needs to be replaced.
The setting items are as follows:
1 Change Platen
2 Platen Interval
3 Platen Count
210
CL4NX/CL6NX Operator Manual
Enable or disable the notification function about
when the cutter unit needs to be replaced.
Set the notification interval about when the
cutter unit needs to be replaced.
Shows the current number of cuts by the cutter.
Enable or disable the notification function about
when the platen roller needs to be replaced.
Set the notification interval about when the
platen roller needs to be replaced.
Shows the current distance the platen roller has
fed.