SATO CL4NX Operator's Manual page 329

The types of errors to print are as follows:
Message
TAG NOT FOUND
WRITE TAG ERROR
PROTECT (TAG)
ERROR
VERIFY TAG
ERR(OR)
LOCKING ERROR
WRONG TID ERROR
MULTI TAGS ERROR
DIFFER EPC ERROR
Cause and Countermeasure
Cause: Did not find the tag to print, or failed to read the tag.
Countermeasure: Confirm the inlay operation and check the printer/antenna
configuration.
Cause: Failed to write the tag.
Countermeasure: Confirm the inlay operation and check the printer/antenna
configuration.
Cause: 1. Tried to write to a locked tag.
2. Tried to write to an address that is not permitted.
Countermeasure: Use media that is not locked.
• Only for ISO/IEC 15693, ISO/IEC 14443 Type A
Cause: The written data and read data do not match.
Countermeasure: Confirm the inlay operation and check the printer/antenna
configuration.
• Only for FeliCa
Cause: The written data and read data do not match. A value
greater than original data was written to subtraction register.
Countermeasure: Write an appropriate value to subtraction register.
Cause: Failed to lock the tag.
Countermeasure: Check the media.
• Only for ISO/IEC 15693
Cause: Read the UID of the tag other than the specified tag.
Countermeasure: Check the tag type setting and the label.
• Only for ISO/IEC 15693, ISO/IEC 14443 Type A
Cause: Multiple tags detected at a time.
Countermeasure: Confirm the inlay operation and check the printer/antenna
configuration.
• Only for FeliCa
Cause: The captured IDm of the card is inconsistent between
processes. (Tried to write to a wrong card.)
Countermeasure: Confirm the inlay operation and check the printer/antenna
configuration.
• Only for UHF
Cause: Detected inconsistent EPC during a series of processes.
Countermeasure: Check the media.
7 Appendix
CL4NX/CL6NX Operator Manual
327