SATO CL4NX Operator's Manual page 199

Prioritize
Applications > SDPL > Prioritize
Select the settings to be prioritized for each setting item of the SDPL
command. You can set whether to prioritize settings through the printer or
through commands.
When you select Settings for an item, the setting specified in the SDPL
menu of the printer will be used.
The setting items are as follows:
1 Format Attribute
2 Pause Mode
3 1 Byte Codepage
4 SDPL Measure
Unit
5 Scalable Font
Style
6 Darkness
7 Factory Offset
8 Speed
9 Sensor Type
Format Attribute
Applications > SDPL > Prioritize > Format Attribute
Set whether to prioritize the settings through the printer or through
commands for the format attribute setting.
The options are as follows:
• Commands: Prioritize the settings through commands.
• Settings: Prioritize the settings through the printer.
Select the setting to be prioritized for the format
attribute.
Select the setting to be prioritized for pause
mode.
Select the setting to be prioritized for the 1 byte
code page.
Select the setting to be prioritized for the
measurement unit.
Select the setting to be prioritized for the
scalable font style.
The option selected in the Printing >
Advanced > Prioritize menu is applied to
these settings and shown on this screen.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
197