SATO CL4NX Operator's Manual page 342

7 Appendix
7.6.3 Changing How the RS-232C Interface is Used (When Using the
KEYENCE Barcode Checkers)
When using one of the KEYENCE barcode checkers (BL-1301, SR-710), modify the barcode checker's
operational settings so that it can communicate with the printer, and then connect it to the printer. After
connecting the barcode checker to the printer, change the Interface setting of the RS-232C interface to
RS-232C Reader on the printer. With this setting, the printer can detect the barcode checker and
automatically connect with it according to the barcode checker's interface settings.
1
After connecting the barcode checker,
press the
operator panel until the LED lights up in
blue to power on the printer.
2
When the printer is in online mode, press
the button on the operator panel to
change to offline mode.
3
Press the
menu.
4
Press the
Interface, and then press the
5
Press the
232C > Interface, and then press the
button.
340
CL4NX/CL6NX Operator Manual
power button on the
button to show the Settings
/ buttons to select
button.
/ buttons to select RS-