Log In To/Log Out Of The Settings Mode - SATO CL4NX Operator's Manual

4 Operation and Configuration
2
Press the
The printer enters settings mode.
To exit the settings mode, press the
4.2.2

Log In to/Log Out of the Settings Mode

After entering the settings mode, you will be prompted
with password if password is enabled (Refer to
Password Enable
When you exit from the settings mode after a
successful login, LOG OUT shows on the bottom left
of the screen.
Press the left soft button if you want to log out
immediately.
Password is required to enter the settings mode
again.
Note
With password enabled, if no button is pressed for
about ten minutes after login, the login session will end
automatically. Password is required to enter the
settings mode again.
64
CL4NX/CL6NX Operator Manual
button.
button.
in System > Password).