SATO CL4NX Operator's Manual page 134

4 Operation and Configuration
Services
Interface > Network > Services
Set the TCP/IP port number, NTP, LPD, FTP or SNMP.
The setting items are as follows:
1 Ports
2 NTP
3 LPD
4 FTP
5 SNMP
6 Online Services
Ports
Interface > Network > Services > Ports
The setting items are as follows:
1 Port1
2 Port2
3 Port3
4 Flow Control
5 Multiple
connections
6 Legacy Status for
Port 9100
7 BCC
Port1
Interface > Network > Services > Ports > Port1
Set the port number.
The setting range is from 1 to 65535.
Each port (1, 2 and 3) must be set to different values.
132
CL4NX/CL6NX Operator Manual
Set the port number.
Set the functions for NTP.
Set the functions for LPD.
Set the functions for FTP.
Set the functions for SNMP.
This service is currently only available in Japan.
Set the port number.
Set the port number.
Set the port number.
Set the communication protocol.
Set whether to receive connection requests
from multiple hosts or applications.
Set whether to change the return status format
of port3 to legacy status.
*Does not show if you have selected None in
the Flow Control menu.
Set the BCC check function.
*Shows only if you have selected Status5 in
the Flow Control menu.