Nfc Interface - SATO CL4NX Operator's Manual

6 Troubleshooting
6.4.4

NFC Interface

No.
1 Check that the NFC interface is enabled.
Check the setting of the NFC interface through the Settings > Interface >
2 Touch the NFC antenna of the printer with the NFC mark on the Android device.
3 Shift the Android device to the front, back, left and right, and then hold it up again.
6.4.5 RS-232C Interface
No.
1 Check that the RS-232C cable is connected correctly.
2 Check that the cable is not damaged.
3 Check the configuration of the printer.
Check the setting of the RS-232C interface through the Settings > Interface >
4 If there are multiple RS-232C ports on the computer, connect to another port.
5 Power on the printer and computer again.
6 Check that no other software is using the same RS-232C port.
6.4.6 IEEE1284 Interface
No.
1 Check that the printer cable is connected to the LPT port of the computer correctly.
2 Check that the cable is not damaged.
3 If you are using a Windows printer driver, check that the correct port is selected.
4 Check the configuration of the printer.
Check the setting of the IEEE1284 interface through the Settings > Interface >
5 Connect to another port.
6 Power on the printer again.
292
CL4NX/CL6NX Operator Manual
Item to check
Item to check
Item to check
NFC menu.
RS-232C menu.
IEEE1284 menu.