SATO CL4NX Operator's Manual page 105

Prioritize
Printing > Advanced > Prioritize
For printer configuration, set whether to prioritize the settings through the
printer or through commands.
The options are as follows:
• Commands: Prioritize the settings through commands.
• Settings: Prioritize the settings through the printer.
Reprint
Printing > Advanced > Reprint
Enable or disable the reprint function.
The options are as follows:
• Enabled: Enable the reprint function.
• Disabled: Disable the reprint function.
If you have selected Enabled in Reprint, you can press the right soft
button (REPRINT) on the online screen to print the previous data again.
Note
The previous data will be lost if you power off the printer.
Print End Position
Printing > Advanced > Print End Position
Adjust the media stop position or cut position when Sensor Type is set to
None. This adjustment also sets the blank amount from the media stop
position.
The setting range varies depending on the print resolution of the printer.
The setting range is as follows:
<CL4NX>
• 203 dpi: 0 to 20000 dots
• 305 dpi: 0 to 18000 dots
• 609 dpi: 0 to 9600 dots
<CL6NX>
• 203 dpi: 0 to 20000 dots
• 305 dpi: 0 to 18000 dots
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
103