SATO CL4NX Operator's Manual page 195

SDPL
Applications > SDPL
To use SDPL as a printer command, set the following items:
1 Control Code
2 Label Rotation
3 SOP Emulation
4 Compatible Mode
5 Right-to-Left print
6 Prioritize
7 Format Attribute
8 Pause Mode
9 1 Byte Codepage
10 SDPL Measure
Unit
11 Scalable Font
Style
Note
Format Attribute, Pause Mode, 1 Byte Codepage, SDPL Measure Unit
and Scalable Font Style are available only if Settings is selected for the
corresponding setting item under the Prioritize menu.
Control Code
Applications > SDPL > Control Code
Set the control code.
The setting items are as follows:
1 Code Type
2 SOH
3 STX
4 CR
5 CNTBY
Set the control code.
Set the page orientation for label printing.
Set the SOP emulation.
Set the compatible mode for SDPL.
Set the Right-to-Left printing function.
Select the settings to be prioritized for the
SDPL command.
Set the format attribute.
Enable or disable the pause mode.
Select the code page to be used for 1-byte
characters.
Set the measurement unit.
Set the style of the scalable fonts.
Set the type of the control code.
Set the SOH code.
Set the STX code.
Set the CR code.
Set the CNTBY code.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
193