Loading Fan-Fold Media - SATO CL4NX Operator's Manual

7
Press the print head down until the head
lock lever is locked.
8
Press the media guide w lightly against the
end of the media, then turn the knob e to
lock the media guide.
9
Close the top cover.
10
After loading the media and ribbon, perform
a test print to make sure that the media is
loaded correctly.
Refer to the Test Print
Menu for details on how to perform a test print.
CAUTION
When closing the top cover, be careful not to pinch your fingers.
3.5.2

Loading Fan-fold Media

Place the fan-fold media on a flat location, then load the media from the media slot on the rear or the
bottom of the printer.
The routing path of the media is shown in
the right picture.
When loading the media, make sure that
the print side faces up.
After passing the media through the slot,
refer to steps 5 through 10 of
3.5.1 Loading Media Roll
media.
Load the media from the
rear of the printer.
Load the media from the
bottom of the printer.
Note
If a media jam frequently occurs with the media being loaded from the bottom of the printer, change the load
location to the rear of the printer.
menu in Section 4.4.6 Tools
Section
to load the
3 Loading the Ribbon and Media
CL4NX/CL6NX Operator Manual
3
2
45