SATO CL4NX Operator's Manual page 151

Destination 1
Interface > Network > Services > SNMP > Traps > Destination 1
Set address 1 for trap destination.
The displayed IP version differs depending on the IP Version setting.
Destination 2
Interface > Network > Services > SNMP > Traps > Destination 2
Set address 2 for trap destination.
The displayed IP version differs depending on the IP Version setting.
Shows only if you have selected 2 or 3 in the Destinations menu.
Destination 3
Interface > Network > Services > SNMP > Traps > Destination 3
Set address 3 for trap destination.
The displayed IP version differs depending on the IP Version setting.
Shows only if you have selected 3 in the Destinations menu.
Community
Interface > Network > Services > SNMP > Traps > Community
Set the Traps community name.
Shows only if you have selected 1 or 2c in the SNMP Version menu.
You can enter alphabetic, numeric and symbolic characters in the range of
1 to 32 characters.
Initial setting: trapcom
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
149