Appendix - SATO CL4NX Operator's Manual

7

Appendix

7.1 List of Initial Values
The initial value refers to the setting value of the printer when it was shipped from the factory.
If you reset the printer, the setting values of the printer will change back to the factory default values. The
tables below show the initial value of each setting item and type of reset that changes the value back to
the initial value.
CAUTION
It is generally not necessary to perform the initialization. Doing so will remove all the customer settings.
7.1.1 Printing Menu
Setting Item
Label Length
Label Width
Auto Measure
Ribbon
Ribbon Near End
Speed
Sensor Type
Auto-mode
Initial Value
CL4NX
203 dpi: 20000 dots
305 dpi: 18000 dots
609 dpi: 9600 dots
203 dpi: 832 dots
305 dpi: 1248 dots
609 dpi: 2496 dots
Disabled
Use Ribbon
Enabled
203 dpi: 6 ips
305 dpi: 6 ips
609 dpi: 4 ips
Linerless mode: 4 ips
Gap
None (When Print
Mode is Linerless)
Enabled
CL6NX
203 dpi: 20000 dots
305 dpi: 18000 dots
if Head Base Position
is Standard
203 dpi: 1216 dots
305 dpi: 1984 dots
if Head Base Position
is Left-justify
203 dpi: 1340 dots
305 dpi: 2010 dots
203 dpi: 6 ips
305 dpi: 6 ips
Gap
CL4NX/CL6NX Operator Manual
Factory
User
Reset
Reset
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
295