SATO CL4NX Operator's Manual page 238

4 Operation and Configuration
Logs
RRRRRRR
IC
SCSC
dcdc...
Copy
Tools > Barcode Checker > Settings > Logs > Copy
Copy the barcode check log file to the USB memory.
Available only if there are barcode check logs in the printer and if you have
installed the USB memory.
Press the right soft button to copy the log file to the USB memory.
CAUTION
Be sure to perform a virus check for the USB memory before connecting it
to the printer. SATO Corporation shall not be held responsible for any
printer malfunctions caused by a virus spread via USB memory.
Remove
Tools > Barcode Checker > Settings > Logs > Remove
Delete the barcode check log file.
Available only if there are barcode check logs in the printer and if you have
installed the USB memory.
Press the right soft button to delete the log file.
236
CL4NX/CL6NX Operator Manual
Check result
SUCCESS • In readable mode, this means everything is correct.
• In comparison mode, this means that the read data and
print data match.
FAILURE • In readable mode, this means that the barcode checker
could not read the number of printed barcode data.
• In comparison mode, this means that the read data and
print data do not match.
IGNORED This means that the data is read during a period other than
from the start to the end of checking, while the printer is active.
The amount of print data as a check target
* If the check result is "IGNORED", this becomes "--".
Size of print data (bytes)
*If the check result is "IGNORED", this becomes "----".
Print data
*If the check result is "IGNORED", nothing is output.