SATO CL4NX Operator's Manual page 101

Every Page
Printing > Advanced > Every Page
Specify the number of media between each head check.
Shows only if you have selected Every Page in the Head Check Mode
menu.
The setting range is from 1 to 999999.
Check Media Size
Printing > Advanced > Check Media Size
Enable or disable media size check.
Media size check is a function to detect a Media Error when you load a
media with a length longer than the media size specified by command, or if
you have specified print data larger than the loaded media length.
Shows only if you have selected Gap or I-Mark in the Sensor Type menu.
The options are as follows:
• Enabled: Enable media size check.
• Disabled: Disable media size check.
Adjustments
Printing > Advanced > Adjustments
Correct the offset position, print position and print darkness.
The setting items are as follows:
1 Offset
2 Pitch
3 Darkness Adjust
Adjusts the backfeed/stop position for Tear-off/
Cut/Dispense operation.
Adjusts the leading edge of media position thus
effects the vertical print position placement.
Fine tune the print darkness.
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
99