SATO CL4NX Operator's Manual page 122

4 Operation and Configuration
DNS
Interface > Network > Settings > Wi-Fi > IPv6 > DNS
If you have selected Static in the Mode menu, set the primary address of
the DNS server.
The setting range is as follows:
0:0:0:0:0:0:0:0 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Note
You can register only one IP address for the DNS server for IPv6.
Proxy
Interface > Network > Settings > Wi-Fi > Proxy
Configure the proxy for Wi-Fi. The setting items are as follows:
1 Enabled
2 Server
3 Exclude
Enabled
Interface > Network > Settings > Wi-Fi > Proxy > Enabled
Enable or disable use of proxy.
The options are as follows:
• Enabled: Enable proxy server usage.
• Disabled: Disable proxy server usage.
Note
To enable the proxy, Server should be set and Exclude must contain at
least 127.0.0.1 and localhost.
Server
Interface > Network > Settings > Wi-Fi > Proxy > Server
Set the name or IP address of the proxy server.
Note
Server should be set with a valid name or IP address and port number.
120
CL4NX/CL6NX Operator Manual
Enable or disable use of proxy.
Set the proxy server address.
Exclude the proxy server usage.