Adjusting The Base Reference Point; About The Base Reference Point - SATO FX3-LX Operator's Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

Adjusting the Base Reference Point

The base reference point is the point at which one determines the print position and stop/cut/

dispensing position.

The base reference point differs depending on the operation mode, or I-mark position or gap of the

media you use.

Continuous Mode

I-mark Position or Gap

Center I-mark

Bottom I-mark

Custom I-mark (Labels with I-marks other than

our specifications)

Base Reference Point

This I-mark position is an example.