Adjusting the Base Reference Point
About the Base Reference Point
The base reference point is the point at which one determines the print position and stop/cut/
dispensing position.
The base reference point differs depending on the print mode or media sensor you use.
Continuous Mode
I-mark label
(1) Feed direction
(2) Print position
Tear-Off Mode
I-mark label
(1) Feed direction
(2) Tear-off position
(3) Print position
Dispenser Mode
Gap label
(1) Feed direction
(2) Print position
Gap label
(1) Feed direction
(2) Tear-off position
(3) Print position
367