Added option "Skip voicemail password verification" on extension edit page. [Table 34: SIP
•
Extension Configuration Parameters]
Added Hot-Desking Support. [Table 34: SIP Extension Configuration Parameters]
•
Added one-button on-demand call recording for GXP
•
Add new option to enable or disable "FXS TISS Override" on Hardware Config page. [Table 79:
•
Internal Options/Ports Config]
Added more modes for FXS Two-Wire Impedance Synthesis
•
Added LDAP Sync manual trigger function and synced date displaying. [VOIP TRUNKS]
•
Improved LDAP Sync function, added retrying, file verifying and progress displaying function
•
Added option "Pick Extension Period" on auto-provision settings page of Zero Config
•
Added multiple extension assignment support on device edit page of Zero Config
•
Added "Reset A ll Extensions" button at the Zero Config page to recycle all assigned extensions.
•
[AUTO PROVISIONING]
Added system crash alarm, core dump detection and allow users to download core dump file.
•
[Figure 164: System Events->Alert Events Lists: System Crash]
Add "Keep Trunk CID" option for VoIP trunks, and keep the priorities: DOD->Extension
•
CallerID->Trunk CallerID->Global CallerID. [Table 50: Create New SIP Trunk]
FIRMWARE
V ERSION
1 .0.3.13
Added Fail2Ban support for SIP authentication. [FAIL2BAN]
•
Added voice prompt "Language" selection and "Auto Record" option for extension. [Table 34: SIP
•
Extension Configuration Parameters] [Table 46: Batch A dd SIP Extension Parameters]
Added "Auto Record" option for trunk.
•
Added "Digit Timeout" option and voice prompt "Language" selection for IVR. [Table 61: IVR
•
Configuration Parameters]
Added "Direct Dial Voicemail Prefix" feature code to directly dial or transfer to extension's
•
voicemail. [Table 75: UCM6100 Feature Codes]
Added "Enforce Strong Passwords" option. [Table 76: Internal Options/General]
•
Added FXS MWI Mode. [Table 79: Internal Options/Ports Config]
•
Added system events with alert and Email notification support. [SYSTEM EVENTS]
•
Added new web page for recording files. [RECORDING FILES]
•
FIRMWARE
V ERSION
1 .0.2.21
Added weight information. [Table 1: Technical Specifications]
•
Added NTP server support. [NTP SERVER]
•
Added Czech language for web GUI display. [WEB GUI LANGUAGES]
•
Added VLAN support. "Layer 2 QoS 802.1Q/VLAN tag" and "Layer 2 QoS 802.1p priority value"
•
Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
Page 22 of 304