SIP Outgoing Call through Trunk Failure
Fail2ban Blocking
SIP Lost Registration
SIP Peer Trunk Status
Click on
to configure the parameters for each event. See examples below.
1. Disk Usage.
Detect Cycle: The UCM6100 will perform the internal disk usage detection based on this cycle.
•
Users can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the
cycle.
Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6100
•
system will send the alert.
2. Memory Usage
Detect Cycle: The UCM6100 will perform the memory usage detection based on this cycle. Users
•
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6100
•
system will send the alert.
3. System Reboot
Firmware Version 1.0.9.26
Figure 161: System Events->Alert Events Lists: Disk Usage
Figure 162: System Events->Alert Events Lists: Memory Usage
UCM6100 Series IP PBX User Manual
Page 277 of 304