Figure 94: Enable Sla Mode For Analog Trunk; Figure 95: Analog Trunk With Sla Mode Enabled; Figure 96: Sla Example - Sla Station - Grandstream Networks UCM6100 Series User Manual
Ip pbx
Hide thumbs
Also See for UCM6100 Series:
- User manual (418 pages) ,
- Manual manual (24 pages) ,
- Configuration (19 pages)
Table of Contents
Advertisement
Click on "Save". The analog trunk will be listed with trunk mode "SLA".
2. On the UCM6100, go to web UI->Basic/Call Routes->SLA Station page, click on "Create New SLA
Station". Please refer to section
can create one or more SLA stations to monitor the analog trunk. The following figure shows two
stations, 1002 and 1005, are configured to be associated with SLA trunk "fxo1".
Firmware Version 1.0.9.26
Figure 94: Enable SLA Mode for Analog Trunk
Figure 95: Analog Trunk with SLA Mode Enabled
[CREATE/EDIT SLA STATION]
Figure 96: SLA Example - SLA Station
UCM6100 Series IP PBX User Manual
for the configuration parameters. Users
Page 168 of 304
Advertisement
Table of Contents
Troubleshooting
