Time Settings; Auto Time Updating; Figure 48: Ucm6100 Email Settings - Grandstream Networks UCM6100 Series User Manual

Server
Username
Password
Display Name
Sender
The following figure shows a sample Email settings on the UCM6100, assuming the Email is using
smtp.gmail.com as the SMTP server.
Once the configuration is finished, click on "Test". In the prompt, fill in a valid Email address to send a test
Email to verify the Email settings on the UCM6100.
TIME S ETTINGS
AUTO T IME U PDATING
The current system time on the UCM6100 is displayed on the upper right of the web page. It can also be
found under Web GUI-­>Status-­>System Status-­>General.
To configure the UCM6100 to update time automatically, go to Web GUI-­>Settings-­>Time
Firmware Version 1.0.9.26
Specify the SMTP server when using type "Client".
Username is required when using type "Client". Normally it's the Email
address.
Password to login for the above Username (Email address) is required
when using type "Client".
Specify the display name in the FROM header in the Email.
Specify the sender's Email address.
For example, pbx@example.mycompany.com.
Figure 48: UCM6100 Email Settings
UCM6100 Series IP PBX User Manual Page 80 of 304